Preparing the Power Supply
•If there is a malfunction with the compact power adapter or battery pack, the charge indicator will go out and charging will stop.
•For handling precautions regarding the battery pack, refer to Battery Pack (A228).
•Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day
24before, to ensure a full charge.
•Repeatedly charging and discharging the battery pack will eventually shorten its battery life. You can check the battery life on the [Battery/Hour Meter] status screen (A213). Fully charging the battery pack and then discharging it will give you a more accurate reading.
•We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
Attaching the Battery Pack
1 Set the Qswitch to OFF.
2 Insert the battery pack all the way into the compartment and press gently down until it clicks.
Removing the Battery Pack |
1 Set the Qswitch to OFF.
2 Slide the BATTERY RELEASE lever in the direction of the arrow. While holding it pressed down, slide the battery pack up and remove it from the battery compartment.