Playing Back Movies

1.Open the LCD panel.

2.Holding the lock button pressed down move the power switch to PLAY and slide the / switch to the (MOVIES) position.

The scene index screen appears with the selection frame on the first scene.

E

3. Use the omni selector (, ) to move the selection frame to the scene you want to play back.

Press the / button to begin the playback.

• Playback of the scenes recorded on the disc will start from the scene selected.

• When the end of the last movie recorded is reached, playback will stop and the camcorder will return to the scene index screen.

Press the + or - button on the camcorder

or the NEXT/PREV. buttons on the wireless controller to move to the next or previous index page, respectively.

During Playback:

4.Press the / button again to pause the playback.

5.Press the button to stop the playback and return to the scene index screen.

To use the viewfinder, close the LCD panel.

About the screen display: During playback, the recording’s time code will be displayed at the upper right corner of the screen in hours : minutes : seconds. You can also choose to display instead the date and time when the scene was recorded and additional recording data ( 43).

Depending on the recording, you might occasionally notice a brief stop of the picture or sound at the point where the scene changes.

Basic Functions

Playback

37

Page 37
Image 37
Canon DC 20, DC 10 instruction manual Playing Back Movies