
Using the Flash
You can use the
(auto) | The flash fires automatically according to the brightness |
| of the subject. |
The flash fires automatically according to the brightness | |
| of the subject. The assist lamp lights up to reduce the |
| |
(flash on) | The flash always fires. |
(flash off) | The flash does not fire. Use this setting in places where |
| flash photography is prohibited. |
(flash) button |
PHOTO button |
Assist lamp |
Flash |
1.Set the camcorder to record still images ( ) and select a recording program other than Fireworks (SCN).
2.Press the (flash) button.
•Repeatedly pressing the button will cycle between the flash modes.
•The symbol of the selected flash mode appears on the screen. “” disappears after 4 seconds.
3.Press the PHOTO button, first halfway to activate the autofocus and then fully to record the still image.
The flash fires according to the flash mode selected and the recording conditions.
Do not fire the flash close to people’s eyes.
Do not fire the flash at people while they are driving.
Do not fire the flash with the flash bulb covered with your hand.
The practical range of the flash is approx. 1 to 2 m. The range depends upon the recording conditions.
The range of the flash decreases in continuous shooting mode.
For the
The flash will not fire in the following cases:
-When you press the EXP button in (auto) or
-During auto exposure bracketing.
54