Viewing Still Images
1.Open the LCD panel.
2.Holding the lock button pressed
down move the power switch to PLAY and slide the 
/
switch to the 
(STILLS) position.
3. If necessary, change the media for the still images using the procedure described in the Recording Still Images section (
34).
• You can show the still images on the memory card or the disc. The default media for still images is the memory card.
• As long as you do not change the media selection, the camcorder will show the still images recorded on the media that was selected last.
4. Use the omni selector ( 
) to move between images.
Slide Show
( | 57) | SLIDE SHOW |
|
1.Press the FUNC. button.
2.Use the omni selector (
) to select [ 
SLIDE SHOW] and press ( 
) to make the selection.
3.Use the omni selector (
) to select [START] and press ( 
) to start the slideshow.
•Images are played back one after another.
•Press the 
button to stop the slide show.
Index Screen
1.Move the zoom lever toward W.
The stills index screen appears with the first six still images.
2.Use the omni selector (
, 
) to select an image.
•Move the “
” to the image you wish to view.
•You can switch between index pages by pressing the + or – button.
3.Move the zoom lever toward T.
The index screen closes and the selected image is displayed.
E |
Basic Functions
Playback
39
