Canon DC 10, DC 20 instruction manual Memory Card Related Messages, Access Error

Message	Explanation
ACCESS ERROR	There was a disc error when reading the disc or attempting to	132
	write onto it. Try cleaning the disc or replace it.
	This message can also appear if condensation has formed. Wait	126
	until the camcorder dries completely before resuming use.
DISC COVER IS OPEN	Verify the disc is correctly inserted and close the disc cover.	29
NO DISC	No disc is loaded. Insert a disc.	29
	You inserted a disc recorded in a different Television System	–
	(NTSC).
	This message can also appear if condensation has formed. Wait	126
	until the camcorder dries completely before resuming use.
UNABLE TO RECOVER	Could not recover a corrupted file. Initialize the disc.	89
DATA	This message can also appear if condensation has formed. If you	126
	suspect condensation is the reason, do not initialize the disc and
	wait until the camcorder dries completely before resuming use.
UNABLE TO RECOVER	Could not recover a corrupted file. Initialize the disc.	89
DATA INITIALIZE THE	This message can also appear if condensation has formed. If you	126
DISC
	suspect condensation is the reason, do not initialize the disc and
	wait until the camcorder dries completely before resuming use.
LOADING THE DISC	The disc is being read. Wait before you start recording.	–
OPENING THE DISC	Do not force the disc cover open before it opens automatically. If a	29
COVER	disc is already loaded, this may take a moment.
Memory Card Related Messages

	Message	Explanation
NO CARD		Memory card not is inserted into the camcorder.	28
NO IMAGES		No images are recorded on the memory card.	–
CARD ERROR		A memory card error occurred. The camcorder cannot record or	–
		display the image.
		The error may be temporary. If the message disappears after 4
		seconds and “ ” flashes red, turn the camcorder off, remove the
		card and reinsert the card. If “ ” changes to green, you can
		continue recording/playback.
CARD FULL		Memory card is full. Erase some images to free some space or	92
		replace the memory card.
NAMING ERROR		The folder and file numbers have reached their maximum value.	–
UNIDENTIFIABLE		The image file is corrupted or it was saved using a compression	–
IMAGE		method other than that compatible with this camcorder (JPEG).
	TRANSFER ORDER	You attempted to set more than 998 transfer orders.	111
ERROR
TOO MANY STILL		Disconnect the USB cable and decrease the number of still	–
IMAGES DISCONNECT		images on the memory card or disc to less than 1800. Images
USB CABLE		cannot be erased from a DVD-R or DVD-RW disc recorded in
		VIDEO mode. If a dialog appeared on the computer screen, close
		it. Reconnect the USB cable.

128