Continuous Shooting and Exposure Bracketing

Single

Records a single still image when you press the PHOTO

 

button.

Continuous Shooting

Captures a quick series of still images while you press the

High-Speed Continuous

PHOTO button. For the number of frames per second,

Shooting

refer to the table on the next page.

AEB (Auto Exposure

The camcorder records a still image in three different

Bracketing)

exposures (dark, normal, light in 1/2 EV steps), allowing

 

you to choose the shot you like the best.

 

Mode switch

 

PHOTO button

DRIVE MODE button

1.Set the camcorder to record still images on the card ( / )

and move the mode switch to a position other than .

If you are recording stills on the disc ( ), change the media for the still images ( 34).

2.Press the DRIVE MODE button repeatedly to cycle between the drive modes.

3.Press the PHOTO button halfway.

4.Continuous Shooting/High-Speed Continuous Shooting: Press the PHOTO button fully and hold it pressed down.

A series of still images will be recorded as long as you hold the PHOTO button pressed.

Auto Exposure Bracketing: Press the PHOTO button fully.

Three still images in different exposures are recorded on the memory card.

The drive mode can also be selected from the FUNC. menu ( 57).

When the FUNC. menu is being displayed, the DRIVE MODE button cannot be used.

64

Page 64
Image 64
Canon DC 10, DC 20 Continuous Shooting and Exposure Bracketing, Auto Exposure Bracketing Press the Photo button fully