Canon DR-X10C ■[Brightness] Tab Sheet Settings

Hint

If all of the settings on the [Brightness] tab sheet are disabled, the gamma setting is set to Custom. (See “[Gamma Settings] Dialog Box” on p. 8-14.)

The availability of brightness and contrast settings are as follows, according to the mode setting on the [Basic] tab sheet.

				Setting
		Auto	Brightness	Contrast	Side Back Use Brightness	Side Back Use Contrast
	Black and White	✔	✔	✔	✔	✔
	Error Diffusion	–	✔	✔	✔	✔
Scanning
	Advanced Text
	Advanced Text	–	✔	–	–	–
	Enhancement
Modes	Enhancement II	–	✔	✔	–	–
	256-level Gray	–	✔	✔	✔	–
	24-bit Color	–	✔	✔	✔	✔
	Auto Color Detection	–	✔	✔	✔	✔

✔: available for setting, – : not available for setting, or auto

■[Brightness] Tab Sheet Settings

You can configure the following settings on the [Basic] tab sheet.

[Auto] Check Box

This is enabled when the scanning mode is [Black and White]. The brightness and contrast are adjusted according to the document.

Chapter 8 ISIS/TWAIN Driver Settings

Brightness

Adjusts the brightness of images to be scanned.

Hint

•If images are too dark or if text on the back of a sheet bleeds through, you can drag the slider to the right to increase the setting.

•If images are too light, drag the slider to the left to decrease the setting.

•When the [Auto] check box is selected, the slider automatically selects a brightness level to be used for automatic adjustment.

Contrast

This is enabled when the scanning mode is [Black and White]. The brightness and contrast are adjusted according to the document properties.

[Use Back Side Brightness] Check Box

If the brightness of the front and back of the document pages is different, select this check box to adjust only the brightness of the back side.

[Use Back Side Contrast] Check Box

If the contrast of the front and back of the document pages is different, select this check box to adjust only the contrast of the back side.

8-13