Chapter 3 Basic Operation

Document Feed Tray Extension

Loading Documents at the Left Side

Pull out the tray extension as needed for the length of your document.

This example shows the procedure for loading documents at the left side of the feeder.

1.Spread the document guides all the way to the left and right.

Adjusting the Document Guides

The document guides normally extend at equal distances from the left and right of the center of feeding so that your documents are centered in the feed inlet.

However, each document guide has its own lock lever, so you can load documents to the left or right of center by locking the document guides at the appropriate positions.

Locking the Document Guides

2.Load your documents against the left feed guide.

3.Lock the left document guide (a) by pulling out the lock lever, then slide the right document guide to the right edge of your documents (b).

3-8