Chapter 5 Maintenance

Imprinter Testing

After replacing an ink cartridge or cleaning the print head, perform a test print to confirm proper printing. Test printing is performed by the “Imprinter Test” User Mode selection.

IMPORTANT

Before performing an Imprinter Test, load a sheet of paper into the Document Feed Tray.

■Performing an Imprinter Test

Use the following procedure to execute the Imprinter Test.

1.Load a sheet of paper into the Document Feed Tray for test printing.

2.Press the Menu key on the control panel.

Menu Key

The User Mode is activated.

3.Press the [] key twice to display “Imprinter Test”.

4.Press [Enter].

Enter Key

The Imprinter Test is enabled.

5.Press the [] key to select [OK], and press [Enter].

The test print is executed.

IMPORTANT

If no paper is loaded for test printing, the imprinter test finishes without printing.

6.Press the [Stop] key to exit the User Mode.

5-20