Chapter 4 Other Functions
■Continuous Manual Feeding Mode Setting
This mode disables automatic feeding by the pickup roller, so that the loaded document stack must be fed by hand one sheet at a time by the operator. (See “Continuous Manual Feeding Mode” on p.
ON: The pickup roller is disabled.
OFF: Documents are fed by the pickup roller.
■Selects the amount of time (240, 60 or 10 minutes) from when the scanner is last used to when the
Selects Japanese or English for the language to display on the control panel.
ON: Japanese display panel
OFF: English display panel
■Display Contrast AdjustmentUse to adjust display panel contrast.
Selects the scanner’s SCSI transfer speed.
If the scanner does not operate normally with the default [20] (20 MBytes/s) speed, change this setting to reduce the speed to [10] (10 MBytes/s) or [5] (MBytes/s).
■USB Short Packet SettingIf the scanner does not operate normally when using the USB interface, change this setting to [OFF].
■Dust Detect Mode SettingIf dust is detected on the scanner glass when the scanner is turned ON, the sensor position is moved forward or backward to avoid vertical streaks caused by the dust on the scanned image.
ON2: Displays an error message and stops scanning. (scanning disabled)
ON: Normal display alternates with error message. (scanning enabled)
OFF: Dust detection is disabled.
IMPORTANT
When the dust detection error message is displayed (either continuously or alternating with the normal display), clean the scanning glass.