Chapter 8 ISIS/TWAIN Driver Settings

Patchcode Orientation (ISIS driver only)

This function is enabled when the optional patchcode decoder is installed and batch separation is set to [Patchcode]. Set the orientation to match that of the patchcode of the patchcode sheet.

Hint

Settings for various patchcode types and orientations on document pages are as follows.

Patch T

 

 

(File A)

 

 

Patch II

 

 

(File B)

 

 

Patchcode

0 degrees

90 degrees 180 degrees 270 degrees

Orientation

 

 

[Prescan] Check Box

When this check box is selected, the first document page is prescanned and displayed in the Prescan panel when scanning is first started. Continue scanning after you confirm or adjust brightness and contrast of the scanned image in the Prescan window.

[Verify Count] Check Box

When this check box is selected, the count from the scanner’s count-only mode or an optionally set count is used as the reference for scanning, and a message is displayed when the set count differs from the number of pages scanned. (See “Count-Only Mode” on p. 4-4.)

[Barcodes] button

This button is enabled when the optional barcode module is installed, and opens the [Barcode] dialog box for configuring settings for detecting barcodes in documents.

■[Barcode] Dialog Box Settings

The [Barcode] dialog box is displayed when you click the [Barcode] button, and allows you to configure settings related to detecting barcodes.

IMPORTANT

•For details on barcode specifications, see “Barcode Specifications” on p. 7-6.

•If your application supports barcodes, barcode data that is detected can be read. When using CapturePerfect 3.0, barcode data is saved to the specified log file.

8-21