Chapter 3 Basic Operation

•When the Rapid Recovery System is enabled, scanning pauses when a double feed is detected, and the following error message is displayed.

■When the Rapid Recovery System is Disabled

Return the document pages ejected as a result of double- feed detection to the top of the document stack yet to be scanned, and resume scanning.

■When the Rapid Recovery System is Enabled

1.Check the rejected document page(s).

Hint

•If attached paper, such as a label on the document page, appears to be the cause of the double-feed detection, ignore the detection.

•If two document pages were fed together, rescan the double- fed pages.

2. Press [ ] or [ ] to select [IGNORE] or [RETRY] and press the [Enter] key.

[IGNORE]:

Saves the image of the page that was detected as a double feed, and resumes scanning.

[RETRY]:

The display panel appears as below. Return the double-fed document pages to the tray and press the Start key.

IMPORTANT

•Press the Start key the erase the image that was being scanned when double feeding was detected, and resume scanning.

•Press the Stop key to delete all scanned images, finish scanning, and display an error message.

When detecting double feeds by document length

When detecting double feeds ultrasonically

3-22