Chapter 8 ISIS/TWAIN Driver Settings
[Setting] Button
This button is enabled when [Detect by Ultrasonic] is selected, and displays the [Detect Double Feed Setting] dialog box.
In the [Detect Double Feed Setting] dialog box, you can select the sensor position for detection and set a non- detection area so that the area where a stamp or label is affixed to the document page is not detected as a double feed.
IMPORTANT
•The area within 1.97" (50 mm) from a document edge cannot be set as the
•If the documents overlap by less than 1.97" (50 mm), or if the documents cling (such as from static electricity), ultrasonic detection of double feeds may not word correctly.
Feeding Option
You can select the feeding method for document scanning.
[Standard Feeding]
Load a document and then start scanning with an application program. Scanning stops when the loaded document has been scanned.
[Manual Feeding] (Bypass Mode)
This is linked to the [Bypass Mode] key on the control panel. When [Manual Feeding] is selected, the [Bypass Mode] key is lit and the document holder is raised up. Start scanning with an application program and feed documents manually one at a time. The scanner detects a document and then scans it. Press the stop button to stop scanning.
Hint
If you press the [Bypass Mode] key on the control panel, the feeding option changes to [Manual Feeding].
Start scanning with an application program, load a document, and then press the start button to start the scan operation.
The scanner enters a waiting state when the document has been scanned, and then continues scanning when you load the next document and press the start button. When all of the documents have been scanned, press the stop button to stop scanning.
Hint
When using the panel feeding mode to scan documents with
[Automatic Feeding]
Execute scanning with an application. The scanner starts scanning when it detects a document loaded in the Document Feed Tray.
The scanner enters a waiting state when the document has been scanned, and then continues scanning when it detects the next document. When all of the documents have been scanned, press the stop button to stop scanning.