Chapter 8 ISIS/TWAIN Driver Settings
[Setting] Button
This button is enabled when [Automatic Feeding] is selected, and allows you to set the delay time from when a loaded document is detected until scanning starts.
Batch Separation
Items available for selection depend on the Feeding Option setting: select batch separation timing (for when to start scanning) according to the batch separation capabilities provided by the application program.
[Standard Feeding] feeding option, batch separation is not available
[Manual Feeding] Feeding Option
[Auto]
Each batch of documents is saved with different file names.
[Panel]
A batch is separated when you press the [New File] key on the control panel to start or continue scanning.
Batch Separation (when a patchcode decoder is installed)
When the optional patchcode decoder is installed, batch separation by patchcode is enabled for all feeding option settings.
[Standard Feeding] Feeding Option
[Manual Feeding] Feeding Option
[Patchcode]
Batches are separated whenever a patchcode sheet is detected between documents. (See “Using Patchcode Sheets (Option)” on p.
IMPORTANT
•When [Patchcode] is selected, the [Folio] Scanning Side setting on the [Basic] tab sheet is not available.
•When