Chapter 4 Other Functions
4. User Mode Functions
The following functions are available in the User Mode.
■Buzzer (Beeper) Control Setting
The beeper (“buzzer”) sounds when you press the control panel keys and when a scanning error occurs.
ON2: The beeper sounds when a scanner error occurs.
ON: The beeper sounds when a scanner error occurs, and when a control panel key is pressed.
OFF: The beeper never sounds.
■Double-Feed Control Setting
Select whether
■Double-Feed Retry Setting
When a double feed is detected with Ultrasonic double- feed detection, the
IMPORTANT
You can specify the number of times to retry. When double feeding continues to be detected after retrying the specified number of times, an error message is displayed and scanning stops after the document is ejected at the eject outlet.
■Staple Detection Setting
Select whether staple detection is enabled when the Count- Only mode is enabled. (See “Staple Detection Function” on p.
ON: Detects staples in the
OFF: Does not detect staples in the
■Staple Detection Level Setting
Sets the staple detection sensitivity level.
[1]is the default setting, [2] provides higher sensitivity, and [0] provides lower sensitivity.
■Long Document Mode Setting
You can enable this mode to detect and scan document pages up to 39.37" (1 m) long when the Auto Detection page size setting is selected. (See “Long Document Mode Setting” on p.
ON: Automatically detects page sizes when scanning documents up to 39.37" (1 m) long.
OFF: Automatically detects page sizes when scanning documents up to 17.01" (432 mm) long.
Hint
Feeding a document longer the maximum detectable page size for Auto Detection causes a paper jam indication, and transport stops.