Chapter 3 Basic Operation
5. Scanning
Scanning operations can be controlled by a scanning application program such as the CapturePerfect 3.0 software included with the scanner, or directly from the control panel of the
This section describes the Job Function and provides an overview of CapturePerfect 3.0.
About the Job Function
The Job Function enables you to use the Job Registration Tool to register different jobs which can then be selected for scanning by pressing the [Job] key on the control panel.
Job registration stores scanning condition settings, image file format selection, save destination, and image data processing settings for each job to be used with the Job Function.
Hint
The Job Registration Tool is a
■Executing Jobs
Use the following procedure to execute jobs that have been registered by the Job Registration Tool.
1.Press the Job key on the control panel.
Hint
If no job is displayed, you must register a job using the Job Registration Tool.
2.Press [
] or [
] to select a job.
3.Execute the displayed job by pressing the Start key.
Start Key
4.Open the folder specified during job registration to confirm that the image files have been created.
Job Key
Registered jobs are displayed.