Chapter 3 Basic Operation

Continuous Manual Feeding Mode

Enable the Continuous Manual Feeding Mode from the User Mode when document pages do not separate well using Continuous Feeding.

Feed

Roller

Retard

Roller

IMPORTANT

When the Continuous Manual Feeding Mode is set to ON from the User Mode, make sure to disable it (set to OFF) when finished scanning. Otherwise, normal continuous feeding will be disabled the next time someone uses the scanner.

Hint

For Manual Feeding, you must feed document one page at a time. For Continuous Manual Feeding, you must place the documents on the Document Feed Tray and insert them into the Document Feed Tray opening one page at a time, making operation easier.

■Continuous Manual Feeding Mode Setting

Select Continuous Manual Mode in the User Mode settings to enable continuous manual feeding.

1.Press the Menu key on the control panel.

Menu Key

The User Mode is activated.

2.Press the [] key six times to display “Manual Feed Mode”. (See p. 4-9.)

3.Confirm your settings.

[ON]: Disables the pickup roller so that loaded documents have to be hand fed to the feed roller one page at a time.

[OFF]: Documents are fed continuously by the pickup roller, except when the Bypass Mode key is lit.

4.Press [Enter].

Enter Key

The current setting is indicated by blinking square brackets [ ].

5.Press the [] or [] key to select [ON] or [OFF], and press [Enter] to accept the selection.

6.Press the Stop key to exit the User Mode.

3-12