Chapter 2 Setup
3. Use the supplied USB cable to connect the scanner | 3. Connect the power cord into an AC outlet. b |
to the computer. |
|
Connect the square plug (Type B) of the USB cable to the |
|
scanner. |
|
120 V Type
■Using a SCSI Connection
IMPORTANT
Make sure that the computer is turned OFF before connecting the SCSI cable. If the cable is connected while the computer is on, the scanner may not be properly recognized by the computer.
1.Shut down Windows and turn the computer’s power OFF.
2.Connect the supplied power cord into the power connector on the back of the scanner. a
220 - 240 V Type
4.Use the SCSI cable to connect the scanner to the computer.