Chapter 2 Setup

IMPORTANT

Observe the following when connecting the scanner with other devices in a “daisy chain”.

•The SCSI ID of the scanner is set to “SCSI ID = 2” by default. When using a daisy-chain configuration with other SCSI devices, set the DIP switches so that SCSI ID numbers are not duplicated in the system.

DIP Switches

Default Position (SCSI ID=2)

•The DR-X10C scanner incorporates a SCSI terminator which is permanently set to ON. When using a daisy-chain configuration with other SCSI devices, make sure that the DR- X10C scanner is connected as the last device in the chain. Set the terminators of all other devices to OFF.

2-8