Chapter 8 ISIS/TWAIN Driver Settings
Make settings for
[Start Value]
Enter the start value for the counter.
[Increment]
Enter the increment value for the counter. The counter increases by the value entered here.
[Increment Trigger]
Specifies the type of event that triggers a counter increment.
[New File] (ISIS driver only)
The counter increases when a batch separation occurs according to the Batch Separation settings on the [Others] tab sheet. (See “Batch Separation” on p.
IMPORTANT
The counter for the imprinter does not increase when [Patch code] is selected for [Batch Separation].
[Every Page]
Increments once per page.
[None]
No counting up.
[Reset Value]
Select the initial value when the counter is reset.
[Reset Trigger]
Select the trigger for resetting the counter.
[New File] (ISIS driver only)
The counter is reset when a batch separation occurs according to the Batch Separation settings on the [Others] tab sheet. (See “Batch Separation” on p.
IMPORTANT
The counter for the imprinter does not reset when [Patch code] is selected for [Batch Separation].
[Every Page]
Resets the counter once per page.
[None]
No counter reset occurs.