Chapter 3 Basic Operation

The current setting is indicated by blinking square brackets [ ].

5.Press the [ ] or [ ] key to select [1], [2] or [3].

The Document Feed Tray moves to the selected height.

6.Press [Enter] to accept the selection.

7.Press the Stop key to exit the User Mode.

Closing the Document Feed Tray

To close the Document Feed Tray, lift it gently so that the sides of the tray hook into the scanner body, then press it in at both sides.

Hint

When power is switched OFF while the home position setting of the Document Feed Tray is high, the tray moves to the lowest position before the scanner turns OFF.

CAUTION

When the home position is set to high, make sure to turn the power OFF before closing the tray. Closing the Document Feed Tray while the scanner is ON may damage the scanner.

Document Guides

Unlock the document guides by gently pressing both sides of either guide (a), and sliding the document guides to match the width of your document (b).

Hint

The positions of the left and right document guides can also be locked independently for off-center loading. For details, see “Adjusting the Document Guides” (p. 3-8).

3-7