Chapter 3 Basic Operation
IMPORTANT
The Rapid Recovery System setting in the ISIS/TWAIN driver causes the following process to occur after a paper jam. (See “[Rapid Recovery System] Check Box” on p.
•When the Rapid Recovery System is disabled, images scanned before the paper jam occurs are saved as files, scanning finishes, finished and an error message is displayed. In this case, restart scanning from the document page where the paper jam occurred, or from the beginning.
•When the Rapid Recovery System is enabled, scanning pauses when a paper jam is detected, and an error message is displayed.
Return the jammed document page to the top of the document stack yet to be scanned, and press the Start key to resume scanning.
Start Key
IMPORTANT
•When you press the Start key, the image of the document page that caused the paper jam is deleted before scanning resumes.
•If you press the Stop key, all scanned images are deleted and scanning finishes. In this case, scan the document again from the beginning.
When a double feed is detected while scanning, the document pages for which double feeding was detected are ejected at the eject outlet, an error message appears on the PC and on the display panel, and transport stops.
IMPORTANT
When a double feed is detected, the following process occurs, and messages appear according to the Rapid Recovery System setting in the ISIS/TWAIN driver. (See “[Rapid Recovery System] Check Box” on p.
•When the Rapid Recovery System is disabled, images scanned before the double feed are saved as files, scanning finishes, and the following error message is displayed.
When detecting double feeds by document length
When detecting double feeds ultrasonically