Canon DR-X10C 2. Function Description, ■Verify Scan, ■Count-OnlyMode

Chapter 4 Other Functions

2. Function Description

The Other Functions are described below. See “User Mode” on p. 4-9, for descriptions of the functions set from the User Mode.

■Count-Only Mode

Counts the number of loaded document sheets by simply feeding them through the scanner.

Hint

The Count-Only mode is executed by the Count Only key on the control panel, and can be used to count document sheets even when no computer is connected.

1.Place the documents into the tray.

2.Press the Count Only key on the control panel.

Count Only Key

The Count Only key lights blue when the Count-Only mode is enabled.

3.Press the Start key to start scanning and count the loaded document sheets.

IMPORTANT

To reset the page counter, press and hold the Stop key for two seconds while the Count Only key is lit.

Stop Key

■Verify Scan

The scanner compares the document page count obtained from the Count-Only mode (or entered manually) with the actual count of document pages scanned, and an error message is displayed if the counts do not match.

1.Setting the Count.

Hint

The document page count can be specified by using the count obtained from the Count-Only mode or by pressing the [] and [] keys to enter a number.

2.Select Verify Count in the ISIS/TWAIN driver settings. (See “[Verify Count] Check Box” on p. 8-21.)

4-4