TMoving the Printer
zThe W8200 alone weighs 85 kg (187 lb.). To prevent painful back or other
injury, at least two people (three recommended with the third person supporting the middle from behind), one on each the left and right side, are required to move the printer.
When you move the printer, avoid tangling your feet with the box and other packing material which could cause you to tip over.
z When lifting and moving the printer,separate the printer from the stand,and firmly grip the handles provided below each side of the printer. Gripping either side of the printer at any other location is not safe and could cause the printer to fall and cause personal injury.
TPower Supply
zTo avoid damaging the power plug, which could cause a short circuit and
cause a fire or electrical shock, never pull on the power cord to unplug the cord from the power supply. Always grip the plug to remove it from the power supply.
zTo avoid a fire or electrical shock, do not use an extension cord.
zTo prevent fire or electrical shock, never use a power supply source other
than the one rated for the printer in the country where you purchased the printer.
AC
TCleaning the Printer
zTo avoid minor burns or minor injury from moving parts, before cleaning the
printer always press the Power button to switch off the printer then unplug the power cord from the power supply and allow the electrical contacts inside the printer to cool.
TPrinthead and Ink Tanks
z Store the ink tanks out of the reach of small children. If a child accidentally ingests ink from an ink tank, contact a physician immediately.
zTo avoid staining clothing or your work area with spilled ink, never shake or
drop the printhead or an ink tank.
z The electrical contacts of the printhead become extremely hot during normal operation. To avoid minor burns, never touch the electrical contacts after removing the printhead from the printer.
viii