Loading Cut Sheets

This is the general procedure for loading cut sheets.

•Remove all printed roll media or cut sheets from the tray.

•On the operation panel, select the cut sheet source. (Æ P.2-19)

•Load the cut sheet on the tray. (Æ P.2-21)

•On the operation panel, select the Cut Sheet Type. (Æ P.2-24)

•Adjust the amount of media feed. (Æ P.7-38)

•Start the print job on the computer. (Æ P.3-2,P.4-2)

Important

zStore unused cut sheets in the original package. Store the package in a cool, dry location that is not exposed to direct sunlight.

Note

z Simply pressing Paper Source on the operation panel alternately selects Roll Media or Cut Sheet. If you select Cut Sheet by pressing Paper Source, the roll media source automatically moves to the print standby position so the cut sheet can be set for printing. After the cut sheet is printed, the printer automatically returns to the Roll Media selection for printing.

Selecting the Cut Sheet Source

Use the Paper Source button on the operation panel to set the printer for printing on cut sheets.

1 Press the Online button to display “Offline”.

Paper Source

Data

Message

Power

Roll Media

 

 

 

Cut Sheet

 

 

 

Cancel

 

Enter

Online

Loading Cut Sheets 2-19