dSlot

Provided for installation of either the USB 2.0 or IEEE1394 expansion board. To install, remove the two screws. (Æ Setup Guide)

ePower connector

Provides a connection point for the printer power cord.

fMedia Take-up Unit connector

Provides a connection point for the power cord of the Media Take-up Unit.

TTop View (Inside)

a

e

b

c

d

aGuide rail

An important part for the movement of the carriage.

bCarriage rail

Provides the path for the carriage as it moves from side to side.

cPaper restraint

Required for media and paper output in the paper path.

dPlaten

Supports the paper from below while the printhead moves from side to side on the surface of the paper during printing.

ePaper release lever

Releases the media in the paper path. Upper this lever to open the paper restraint when you need to load a cut sheet, feed a cut sheet manually, or clean inside the printer. (Æ P.2-21)

1-4Before Using the Printer