Switching the Printer Off
When you are finished using the printer, follow this procedure to switch the printer off.
Important
z To prevent damaging the printer or losing valuable data, never switch it off or disconnect the power cord while the printer is operating.
z If the roll media is not to be used for a week or so, open the roll media tray and take up the roll media. Leaving the roll media at the standby position for a week or longer could cause the media to deteriorate.
1 Check the display to make sure that a print job is not in progress.
| |||
|
|
|
|
|
|
| |
|
|
| |
|
If you see an error message displayed, follow the procedure to correct the problem, and make sure the print job has completed. If a print job is in progress, wait for the print job to complete before switching off the printer.
2 Press and hold down Online lamp goes off,
the Power button for over 1 second until the and then release the button.
| |||
|
|
|
|
|
|
|
|
|
“Please wait ..” is displayed for a few seconds, then the printer goes off.