Important

zThe nozzles under protective cap 2 (c) are covered with ink. Handle the printhead carefully to avoid touching these nozzles or dropping the printhead and causing ink stains.

zWhen handling the printhead, always hold it by the grips (a) on the left and right sides of the printhead.

zTo prevent damaging the printhead or poor printing results , never touch the exposed nozzles (e) or electrical contacts (f) on the printhead.

e

f

zNever try to re-attach the protective caps or packing material removed from the printhead. Discard these items immediately in compliance with local regulations regarding the disposal of such items.

12 With the nozzles pointing down and the electrical contacts facing the printer, insert the new printhead into the carriage.

Handle the printhead carefully so its nozzles do not touch the carriage, then press down to ensure that it is installed completely.

6-24Maintenance