Cleaning the Paper Restraint
To achieve the best performance with this printer, use plain paper to clean the reverse side of the paper restraint when the print side or reverse side of the media is dirty, or at least once a month.
Before starting this procedure, prepare some plain paper (or any media other than film).
Important
zUse a sheet of plain paper for the cleaning, a cut sheet or a cut from a roll of plain paper that does not shred easily. The reverse side of film has a tendency to hang up and shred and could cause poor printing if used in this cleaning procedure.
1Press and hold the Power button for 1 second or more until the Online lamp goes off, release the button, then switch the printer off.
| |||
|
|
|
|
|
|
|
|
|
2 Disconnect the power cord from the power source.