zWhile roll media is loaded in the printer, avoid opening and closing the roll media tray. Opening and closing the tray causes the printer to cut the leading edge of the roll media and consume paper.
zYou should remove each sheet output to the output stacker, one at a time.
Note
zBefore shipping a dye ink printer, the Media Type is set for “Plain Paper”.
zBefore shipping a pigment ink printer, the Media Type is set for “Heavy Coated”.
zIt is recommended that the special settings (1 to 5) be used when smudges and blots appear on the print density is too light while printing on one of the media types listed above. The Special settings determine in 5 steps the amount of ink used on the surface of the media. The higher the number in the range of 1 to 5, the greater the amount of ink used. The setting may require testing and adjustment, depending on the media in use and the content of the image.
zThe media size is detected automatically, therefore no setting for the size is required.
zIn order to align the leading edge correctly when the roll media is replaced with a new one, the paper is fed approximately 100 mm (4 in.) then cut.
Loading Roll Media