6 Press ￿ or ￿ to select the type of cut sheet, then press Enter.

If the same type of cut sheet named in the message is already loaded, then just press the Enter button.

C u t S h e e t T y p e

H e a v y C o a t e d

The cut sheet starts to feed.

If the printer detects no skew and there is no problem, then the printer enters the print standby mode.

The table below lists the possible settings for the cut sheet type. For Dye Ink

Media Name

Roll Media Type Setting

Plain Paper

Plain Paper

Coated Paper

Coated Paper

Heavy Coated Paper

Heavy Coated

Glossy Paper

Glossy Paper

Photo Glossy Paper

Photo Glossy

Photo Semi-Glossy Paper

Photo Semi-Glos

Glossy Film

Glossy Film

Back Print Film

Back Print Film

Proofing Paper

Proofing Paper

—

Special 1 to 5

For Pigment Ink

Media Name

Roll Media Type Setting

Heavy Coated Paper

Heavy Coated

Photo Glossy Paper

Photo Glossy

Photo Semi-Glossy Paper

Photo Semi-Glos

Synthetic Paper (Non-Adhesive)

Syn. Paper

Synthetic Paper (Adhesive)

Adh. Syn. Paper

Back Light Film

Back Light Film

Flame-Resistant Cloth

Flame-Res.Cloth

—

Special 1 to 5

Important

zA skew error occurs if the cut sheet is not straight. In this case, repeat the above procedure from Step 1 to set the cut sheet.

zYou must set the correct type of cut sheet. If the set cut sheet does not match the Cut Sheet Type setting, make the correct setting.

(Æ “Select the Cut Sheet Type”, P.2-26)

zYou should remove each sheet output to the output stacker, one at a time.

2-24Print Media You Can Use