Loading Roll Media

This is the general procedure for loading a paper cassette.

•Remove all printed roll media or cut sheets from the tray.

•On the operation panel, select the roll media source. (Æ P.2-8)

•Load the roll media in the roll media tray. (Æ P.2-9)

•On the operation panel, select the Roll Media Type. (Æ P.2-16)

•Adjust the amount of media feed. (Æ P.7-38)

•Start the print job on the computer. (Æ P.3-2,P.4-2)

Important

zMake sure that the printer is switched on when you load roll media in the printer. If the Roll Media Type selection does not match the type of roll media loaded in the printer, this could cause poor print quality.

zStore unused roll media and other media in the original package. Store the package in a cool, dry location that is not exposed to direct sunlight.

zTo prevent jams, never open the roll media tray during printing.

zIf you switch the printer off with the roll media set, do not pull out the roll media tray. If you must open the roll media tray, open the upper cover, raise the media release lever, then open the roll media tray.

Selecting the Media Source

When printing on roll media, with the operation panel select roll media as the media source.

1 Press the Online button to display “Offline”.

Paper Source

Data

Message

Power

Roll Media

 

 

 

Cut Sheet

 

 

 

Cancel

 

Enter

Online

2-8Print Media You Can Use