Aligning the Printhead
Note
If you notice broken vertical lines or deviation in colors in your prints, execute Print Pattern A and align the printhead. Before printing a printhead alignment pattern, make sure A3 size or larger roll media is loaded.
Follow the procedure below to align the printhead.
z When you execute Print Pattern A, use the media most commonly used with the printer.
z If you are using a cut sheet, make sure at least one sheet of unused A3 paper (not the blank side of used paper) or larger is set.
1 If the printer is off, press the Power button to switch the printer on.
After a few seconds “Online” is displayed in the operation panel and the Online lamp lights.
2 Press the Online button twice to display “MAIN MENU”.
3 Press or to select “System Setup” then press .
Aligning the Printhead