2 Press Paper Source to light the Roll Media lamp.
Pressing Paper Source alternates the selection between Roll Media and Cut Sheet.
| |||
|
|
|
|
|
|
|
|
|
Loading the Roll Media
Follow the procedure below to set the roll media in the roll media tray. If there are any cut sheets or other paper output in the tray, remove them first.
Note
z Before changing to a larger media size, open the upper cover and clean the interior of the printer to ensure that the entire platen is clean. (Æ
z For more details about the type of roll media that can be loaded in the printer, refer to “Print Media That Can Be Used”. (Æ
1 Open the tray.
“Open Roll Tray” is displayed. If the roll media is already set, then “Close Tray” is displayed.
Loading Roll Media