![](/images/new-backgrounds/1134359/13435919x1.webp)
2HOW TO ADJUST EACH PART
2
4
3
1
1 | Level Adjustment |
¥ Turn the level adjuster on the rear leg so that the unit is placed sta- |
bly.
¥ When the indication line on the level adjuster is at the top, the rear leg is at the same level as the caster of the front leg.
Indication line | |||
7 | 8 |
| |
5 |
| ||
6 |
| ||
|
| ||
3 | 4 | Level adjuster | |
1 | |||
2 |
2 | Adjust the seat position. | |
¥ Pull the seat slide lock pin to allow the seat to slide forward/backward sitting on the seat. When the seat reaches the | ||
| desired position, release your hand from the seat slide lock pin and then attempt to move the seat slightly. | |
| The seat position can be adjusted while pulling up the seat lock pin. When desired seat position is obtained, release the | |
| lock pin free and move the seat slightly and the lock pin will click into the nearest hole by spring pressure. Holes are | |
| provided at an interval of 3 | |
| Caution: | ¥ When adjusting the seat position, make sure to slide the seat while the grip is being held. If the |
|
| seat is slid while the control unit is being held, the unit may be damaged. |
¥When the seat height is set at a lower position, do not pull the spring lock pin while seated, as the seat may suddenly slide down backward.
¥When sliding the seat, take care not to break the pulse sensor cable.
Grip | Slide | |
Pull | ||
|
Lock pin
10