Ciprico 4105 Series user manual Mode Change Procedure

Operations MediaVault 4105 User Manual

Mode Change Procedure

To change the mode, perform the following.

1.Turn off the computer.

2.Select a mode.

3.Set the mode number at the Mode Select buttons, located at the rear of the MV 4105. See Figure 5-3. Use a pointed object (such as a pen tip)

to press the desired Mode Select button.

•Press the upper button to decrease the mode number.

•Press the lower button to increase the mode number.

Press

to change

Press

to change

FIGURE 5-3.Mode Select Buttons.

4.Turn off power to the MV 4105.

5.Press and hold the MODE SET button (see a description of the button on page 5-13)

6.Apply power to the MV 4105.

7.Keep holding down the button until two beeps are heard to confirm the mode change.

8.Release the MODE SET button.

5-12 MV 4105_Ciprico Inc.