Ciprico 4105 Series user manual Power-up the array 11. Power-up the host computer

MediaVault 4105 User Manual Maintenance

NOTE: Rebuild (reconstruction) times vary, depending on the system’s work load. When the system is idle the rebuild time is approximately 16.5 Gbytes/minute (that is, it takes approximately 60 minutes to rebuild 1TByte).

NOTE: The service LED stays illuminated and the RAID 3 LED blinks. After the rebuild process is finished, the drive LEDs and service LED go off.

9.As a precaution, after the rebuild (reconstruction) process is finished, power-down the array.

10.Power-up the array.

11.Power-up the host computer.

MV 4105_Ciprico Inc. 8-7