Ciprico 4105 Series user manual Disk Drive Module Replacement

Maintenance MediaVault 4105 User Manual

Disk Drive Module Replacement

Removing, replacing, and rebuilding a disk drive module consists of four inter-related procedures. Perform these four procedures in sequence:

1.“Power-Off the Host Computer and MediaVault Unit” (see below)

2.“Remove the Front Panel” (see page 8-3).

3.“Remove the Disk Drive Module” (see page 8-4).

4.“Install and Rebuild a Disk Drive Module”. Rebuild the disk drive module, depending on whether the disk drive failed in RAID 0 mode (see page 8-5)or RAID 3 mode (see page 8-6).

Power-Off the Host Computer and MediaVault Unit

Before removing and replacing any components from the MV 4105, perform the following:

1.Power-off the host computer (PC or Macintosh).

2.Power-off the MV 4105.

8-2 MV 4105_Ciprico Inc.