Ciprico 4105 Series user manual Remove the Disk Drive Module

Maintenance MediaVault 4105 User Manual

Remove the Disk Drive Module

1.Identify the disk drive module to be replaced, by locating the slow blinking light next to it.

2.Shutdown the host computer and turn off the MV 4105.

3.Push down on the button of the disk drive to be removed. The handle pops-up automatically.

4.Lift the handle while pulling forward on the disk drive. See Figure 8-2. Gently pull it forward. Set the defective disk drive module aside.

HandleButton

FIGURE 8-2.Handle and Button at the Disk Drive Modules.

5.Perform the install and rebuild process. See page 8-5.

8-4 MV 4105_Ciprico Inc.