Chapter 8 Managing Controller Software and Configurations
Resetting the Controller
Step 3 Follow the instructions in the “Using the Configuration Wizard” section on page
Resetting the Controller
You can reset the controller and view the reboot process on the CLI console using one of the following two methods:
•Turn the controller off and then turn it back on.
•On the CLI, enter reset system. At the confirmation prompt, enter y to save configuration changes to NVRAM. The controller reboots.
When the controller reboots, the CLI console displays the following reboot information:
•Initializing the system.
•Verifying the hardware configuration.
•Loading microcode into memory.
•Verifying the Operating System software load.
•Initializing with its stored configurations.
•Displaying the login prompt.
Cisco Wireless LAN Controller Configuration Guide
|
| ||
|
|
