Cisco Systems 3.2 manual Interfaces New

Chapter 3 Configuring Ports and Interfaces

Configuring Dynamic Interfaces

Figure 3-6 Interfaces > New Page

Step 3 Enter an interface name and a VLAN identifier, as shown in Figure 3-6.

Note Enter a non-zero value for the VLAN identifier. Tagged VLANs must be used for dynamic interfaces.

Step 4 Click Apply to commit your changes. The Interfaces > Edit page appears (see Figure 3-7).

Figure 3-7 Interfaces > Edit Page

Cisco Wireless LAN Controller Configuration Guide

OL-8335-02 3-15