Chapter 3 Configuring Ports and Interfaces
Configuring Ports
Table | Controller Spanning Tree Status (continued) | |
|
|
|
Parameter |
| Description |
|
| |
Max Age (seconds) | The maximum age of STP information learned from the network on any | |
|
| port before it is discarded. |
|
| |
Hello Time (seconds) | The amount of time between the transmission of configuration BPDUs | |
|
| by this node on any port when it is the root of the spanning tree or trying |
|
| to become so. This is the actual value that this bridge is currently using. |
|
| |
Forward Delay (seconds) | This value controls how fast a port changes its spanning tree state when | |
|
| moving toward the forwarding state. It determines how long the port |
|
| stays in each of the listening and learning states that precede the |
|
| forwarding state. This value is also used, when a topology change has |
|
| been detected and is underway, to age all dynamic entries in the |
|
| forwarding database. |
|
| Note This is the actual value that this bridge is currently using, in |
|
| contrast to Stp Bridge Forward Delay, which is the value that |
|
| this bridge and all others would start using if this bridge were |
|
| to become the root. |
|
| |
Hold Time (seconds) | The minimum time period to elapse between the transmission of | |
|
| configuration BPDUs through a given LAN port. |
|
| Note At most, one configuration BPDU can be transmitted in any |
|
| hold time period. |
|
|
|
Step 8 Table
Table
Parameter | Description | |
|
| |
Spanning Tree Algorithm | Enables or disables STP for the controller. | |
| Options: Enable or Disable | |
| Default: Disable | |
|
| |
Priority | The location of the controller in the network topology and how well the | |
| controller is located to pass traffic. | |
| Range: | 0 to 65535 |
| Default: | 32768 |
|
| |
Maximum Age (seconds) | The length of time that the controller stores protocol information | |
| received on a port. | |
| Range: | 6 to 40 seconds |
| Default: | 20 seconds |
|
|
|
Cisco Wireless LAN Controller Configuration Guide
|
| ||
|
|