Appendix D System Messages and Access Point LED Patterns
System Messages
Table | System Messages and Descriptions (continued) | |
|
|
|
Error Message |
| Description |
|
| |
LRADIF_CURRENT_CHANNEL_CHANGED | Informational message. | |
|
| |
LRADIF_RTS_THRESHOLD_CHANGED | Informational message. | |
|
| |
LRADIF_ED_THRESHOLD_CHANGED | Informational message. | |
|
| |
LRADIF_FRAGMENTATION_THRESHOLD_ | Informational message. | |
CHANGED |
|
|
|
| |
RRM_DOT11_A_GROUPING_DONE | Informational message. | |
|
| |
RRM_DOT11_B_GROUPING_DONE | Informational message. | |
|
| |
ROGUE_AP_DETECTED | May be a security issue.Use maps and trends to | |
|
| investigate. |
|
| |
ROGUE_AP_REMOVED | Detected rogue access point has timed out. The | |
|
| unit might have shut down or moved out of the |
|
| coverage area. |
|
| |
AP_MAX_ROGUE_COUNT_EXCEEDED | The current number of active rogue access points | |
|
| has exceeded system threshold. |
|
|
|
LINK_UP |
| Positive confirmation message. |
|
|
|
LINK_DOWN |
| Port may have a problem or is administratively |
|
| disabled. |
|
| |
LINK_FAILURE | Port may have a problem or is administratively | |
|
| disabled. |
|
| |
AUTHENTICATION_FAILURE | Attempted security breech. Investigate. | |
|
| |
STP_NEWROOT | Informational message. | |
|
| |
STP_TOPOLOGY_CHANGE | Informational message. | |
|
| |
IPSEC_ESP_AUTH_FAILURE | Check WLAN IPSec configuration. | |
|
| |
IPSEC_ESP_REPLAY_FAILURE | Check for attempt to spoof IP Address. | |
|
| |
IPSEC_ESP_POLICY_FAILURE | Check for IPSec configuration mismatch between | |
|
| WLAN and client. |
|
| |
IPSEC_ESP_INVALID_SPI | Informational message. | |
|
| |
IPSEC_OTHER_POLICY_FAILURE | Check for IPSec configuration mismatch between | |
|
| WLAN and client. |
|
| |
IPSEC_IKE_NEG_FAILURE | Check for IPSec IKE configuration mismatch | |
|
| between WLAN and client. |
|
| |
IPSEC_SUITE_NEG_FAILURE | Check for IPSec IKE configuration mismatch | |
|
| between WLAN and client. |
|
| |
IPSEC_INVALID_COOKIE | Informational message. | |
|
| |
RADIOS_EXCEEDED | Maximum number of supported Cisco Radios | |
|
| exceeded. Check for controller failure in the same |
|
| Layer 2 network or add another controller. |
|
| |
SENSED_TEMPERATURE_HIGH | Check fan, air conditioning and/or other cooling | |
|
| arrangements. |
|
|
|
Cisco Wireless LAN Controller Configuration Guide
| ||
|
