Cisco Systems 4300 manual Snmp Settings Window, Snmp v2c Area, Snmp v3 Area

Chapter 3 Configuring and Managing the IP Camera

Network Setup Windows

SNMP Settings Window

The SNMP Settings window provides options for configuring Simple Network Management Protocol (SNMP) settings for the IP camera. These settings can help you manage complex networks by sending messages to different devices on the network.

To display the SNMP window, access the configuration windows as described in the “Performing the Initial Setup of the IP Camera” section on page 2-5, click Network Setup, then click SNMP.

If you change any options in this window, you must click the Save Settings button to save the changes. If you do not click this button, changes are not retained when you exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.

Table 3-13describes the options in the SNMP Settings window.

Table 3-13 SNMP Settings Window Options

Option	Description
SNMP v2c Area
Enable SNMP v2c	Check this check box to enable SNMP v2c.
Read Community String	Enter the SNMP read community string, which identifies the valid read
	community.
Trap Community String	Enter the SNMP trap community string.
Primary Trap Receiver	Identify the primary trap receiver of the SNMP v2c manager by choosing IP
	Address or Hostname from the drop-down list and entering the IP address
	or host name in the corresponding field.
Secondary Trap	Identify an optional secondary trap receiver of the SNMP v2c manager by
Receiver	choosing IP Address or Hostname from the drop-down list and entering the
	IP address or host name in the corresponding field.
SNMP v3 Area
Enable SNMP v3	Check this check box to enable SNMP v3.
Use Default Local	Click this radio button if you want to use the default local engine ID for
Engine ID	SNMP.
	The default local engine ID is 8000000903<MAC>, where <MAC> is the
	MAC address of the IP camera.

	Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
OL-19609-04		3-21