Full Screen button, Audio controls | Cisco Systems 4300 specs

Chapter 4 Viewing Live Video

Table 4-1	Camera Video/Control Window Controls (continued)

Control	Description

Restore button	Displays the default video image, which is not rotated and not reversed.

Full Screen button	Displays the video image in full screen mode.
	To return to normal display mode, click the full screen image.

Audio controls

Disable Speaker	Click the Disable Speaker button to mute audio that is sent from the IP camera
toggle button	to the PC that you are using. The button changes to the Enable Speaker button.
	Click the Enable Speaker button to unmute audio. The button changes to the
	Disable button.

Enable Speaker toggle
button

	Mute Microphone	Click the Mute Microphone button to mute the audio stream that is captured
	toggle button	and sent to the IP camera from the internal or external microphone of the PC
		that you are using. When you click this button, the speaker that is attached to
		the IP camera does not play audio that is transmitted from your PC.
		Note If you are simultaneously accessing other IP cameras in different
	Unmute Microphone
	Unmute Microphone	browser sessions on the same PC, clicking this button in one browser
	toggle button	session does not mute the audio that the PC sends to the other IP
		cameras.
		When you click the Mute Microphone button, it changes to the Unmute
		Microphone button. Click the Unmute Microphone button to unmute audio
		that is sent to the IP camera. The button changes to the Mute Microphone
		button.

	Restore button	Resets audio controls to their default values.

Speaker Volume slider	When the speaker is unmuted, drag this slider to adjust the volume at which
and field	your PC speakers play the audio from the IP camera, or enter a value from 0
	through 100 and press the Enter key.
	The default value is 50.

Microphone	Drag this slider to adjust the gain of the PC microphone (that is, how sensitive
Sensitivity slider and	it is to the audio that it picks up and that is sent to the IP camera), or enter a
field	value from 0 through 100 and press the Enter key.
	The default value is 50.

Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide

4-4	OL-19609-04

Image 68

Cisco Systems 4300 manual Full Screen button, Audio controls

Contents

Americas Headquarters Text Part Number OL-19609-04 Copyright 2009-2011 Cisco Systems, Inc. All rights reserved N T E N T S Log Windows Overview Organization Preface IP Camera Features Overview IP Camera Physical Details Adjusting Back Focus on the IP Camera section on Front of IP Camera Rear of IP Camera Described in the Resetting the IP Camera section on Side of IP Camera DC Auto Iris Lens Connector Pinouts Package Contents Installing the IP Camera Getting Started Action Explanation Action Explanation Action Explanation Before you Begin Performing the Initial Setup of the IP CameraProcedure Accessing the IP Camera Protocol//ipaddress Understanding the IP Camera User Interface IP Camera Window Links Field Description IP Camera WindowsLink Description Adjusting Back Focus on the IP Camera LAN IPIO Port Status Channel 1 and Channel Powering the IP Camera On or Off Resetting the IP Camera Section on Reset Type Procedure RemarksInitial Setup of the IP Camera OL-19609-04 Configuring and Managing the IP Camera Accessing Navigating the Configuration Windows Feature Setup Windows Snmp Streaming Streaming Settings WindowResolution Primary fps Secondary fps Current Channel Area Streaming Setup AreaOption Description Audio Setup Area Video Area Microphone Area Camera Settings WindowVideo Adjustments Area Described in , Viewing Live Video Day Night Filter Area Video Overlay Settings Window IO Ports Settings WindowText Overlay Area IO Ports Output Ports Pan Tilt Settings WindowInput Ports Area Pan/Tilt Area RS-232 SettingsEvent Notification Window Event Triggering Area Option Email Notification Area Patrol Sequence Window Patrol Sequence Area Analytics Windows Network Setup WindowsBasic Settings Window Basic Device Operations Area Basic Settings AreaIP Addressing Window Time Settings Window IP Addressing Area Set Time Mode Area You click Save SettingsLocal Time Area Clone PC Time button Discovery Settings Window NTP Server Settings AreaCisco Discovery Protocol CDP Area Show Neighbors button Snmp v3 Area Snmp Settings WindowSnmp v2c Area 8000000901IPv4addresshex 802.1x Settings Window EAP-FAST Configuration Options IP Filter Settings WindowEAP-PEAP Configuration Options QoS Settings Window Class of Service CoS AreaIP Filter Area Filter Entries Area Account Initialization Window Administration WindowsDifferentiated Services DiffServ Area SSH Administrator Accounts AreaAccess Protocols Area User Settings Window User List Area Delete button Maintenance Settings WindowChange button Factory Default Area Restore buttonReset button Reboot Area Reboot button Device Information Area Firmware Settings WindowAddressing Window section on Firmware Maintenance Area Upgrade buttonDevice Processes Window Details button Password Complexity Window Log Setup Settings WindowLog Setup Settings Window, Local Log Window, Log Windows Local Log Settings Area Syslog Settings Area Local Log Window Log List Area Log messages, see -25 on Explanation Severity Defaultsrestored DevicerebootautoDevicerebootmanual Ethsignaldegrade Login OutputoneresetOutputtworeset Powersupplyfailure Timedstswitch TimeregswitchStartstream Stopstream Control Description Video controls Streaming Settings Window section on Video image controls Image tools Hotspot Zoom button Hotspot Pan/TiltSave Snapshot button Mirror button Full Screen button Audio controls Presets controls Set Current Preset asAdd Preset Position Preset button Pan/tilt speed controls Motion detection Motion detection controls Enable Motion Detection check box Save Settings button Full Screen check Troubleshooting Troubleshooting Numerics IN-2 Http Https LED IN-4 IN-5 IN-6 IN-7 IN-8