7-2
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-23769-01
Chapter
Status Menu
Status Menu
To display the Status menu, press the Applications button and then select Administrator Settings >
Status. To exit the Status menu, press the Back softkey.
The Status menu includes theses options, which provide information about the phone and its operation:
• Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see the “Status Messages Screen” section on page 7-2.
• Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the “Network Statistics Screen” section on page 7-6.
• Call Statistics—Displays counters and statistics for the current call. For more information, see the
“Call Statistics Screen” section on page 7-8.

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated.
You can access this screen at any time, even if the phone has not finished starting up. Table 7-2 describes
the status messages that might appear. This table also includes actions you can take to address errors.
Unified Video
Advantage Indicates if video call is enabled or disabled. Display only—cannot configure.
Active Load Version of firmware currently installed on the
phone. Display only—cannot configure.
Inactive Load Version of firmware installed on the phone,
but not currently running. The "Inactive
Load" label also displays the status of the
load, such as "Upgrade in Progress" or
"Upgrade Failed."
Display only—cannot configure.
Last Upgrade Date of the most recent firmware upgrade. Display only—cannot configure.
Active Server IP address or name of the server to which the
phone is registered. Display only—cannot configure.
Stand-by Server IP address or name of the standby server. Display only—cannot configure.
Backlight On Time Time of day the backlight is to automatically
turn itself on for days listed in the off
schedule.
Display only—cannot configure.
Backlight On
Duration Amount of time the backlight is to be active
for when it is turned on by the programmed
schedule.
Display only—cannot configure.
Backlight Idle
Timeout Time duration how long to wait before the
backlight is turned off when it was turned on
by user activity.
Display only—cannot configure.
Days Backlight Not
Active Days that the backlight is to remain off by
default. Display only—cannot configure.
Table 7-1 Model Information Settings for the Cisco Unified IP Phone 6900 Series (continued)
Option Description To Change