E-4
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-23769-01
Appendix
Installing the Bracket
Step 2 Attach the phone bracket to the IP phone (Figure E-3).
a. Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached
cords from the base of the phone.
b. Remove the label covers that are concealing the screw holes.
c. Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The phone’s
ports should be accessible through the holes in the bracket.
d. Secure the phone bracket to the IP Phone with the machine screws.
e. Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the
clips incorporated into the phone body.
Figure E-3 Attaching the Phone Bracket
Step 3 Remove the handset wall hook in the handset rest, rotate the hook 180 degrees, and reinsert the hook.
The hook should have a lip on which the handset catches when the phone is vertical (Figure E-4).
274937
Screw holes
Slot for
mounting tabs