Cisco Systems 6921 Creating Custom Phone Rings section, Overview of Supported Security Features

Chapter

Telephony Features Available for the Cisco Unified IP Phone

Table 5-1	Telephony Features for the Cisco Unified IP Phone (continued)
Feature		Description	Configuration Reference
Reroute Direct Calls to		Reroutes a direct call to users’ mobile phone to the	For more information, see the Cisco Unified
Remote Destination to		enterprise number (desk phone). For an incoming	Communications Manager Features and
Enterprise Number		call to remote destination (mobile phone), only	Services Guide, Cisco Unified Mobility.
		remote destination rings; desk phone does not ring.
		When the call is answered on their mobile phone,
		the desk phone displays a Remote In Use message.
		During these calls, users can make use of various
		features of their mobile phone.
Remote Port		Allows the administrator to configure the speed	To configure the parameter in the Cisco
Configuration		and duplex function of the phone Ethernet ports	Unified CM Administration application,
		remotely by using Cisco Unified CM	choose Device > Phone, select the appropriate
		Administration. This enhances the performance for	IP phone, and scroll to the Product Specific
		large deployments with specific port settings.	Configuration Layout pane (Switch Port
		Note If the ports are configured for Remote Port	Remote Configuration or PC Port Remote
		Configuration in Cisco Unified CM, the	Configuration).
			To configure the setting on multiple phones
		data cannot be changed on the phone.
			simultaneously, configure the remote
			configuration in either Enterprise Phone
			Configuration (System > Enterprise Phone
			Configuration) or Common Phone Profile
			Configuration (Device > Device Settings >
			Common Phone Profile.
			(Switch Port Remote Configuration or PC Port
			Remote Configuration)
Ring Tone Setting		Identifies ring type used for a line when a phone	For more information, see the following:
		has another active call.	• Cisco Unified Communications Manager
			Administration Guide, Directory Number
			Configuration.
			• “Creating Custom Phone Rings” section
			on page 6-2.
Secure Conference		• Allows secure phones to place conference	For more information about security, see the
		calls using a secured conference bridge.	“Overview of Supported Security Features”
		• As new participants are added by using	section on page 1-16.
			For additional information, see the following:
		Confrn, Join, cBarge, Barge softkeys or
		MeetMe conferencing, the secure call icon	• Cisco Unified Communications Manager
		displays as long as all participants use secure
			System Guide, “Conference Bridges.”
		phones.
			• Cisco Unified Communications Manager
		• The Conference List displays the security
			Administration Guide, “Conference
		level of each conference participant. Initiators
			Bridge Configuration”.
		can remove non-secure participants from the
			• Cisco Unified Communications Manager
		Conference List. (Non-initiators can add or
		remove conference participants if the	Security Guide.
		Advanced Adhoc Conference Enabled
		parameter is set.)

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

OL-23769-01 5-13