8-2
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Accessing the Web Page for a Phone
Procedure
Step 1 Obtain the IP address of the Cisco Unified IP Phone by using one of these methods:
• Search for the phone in Cisco Unified Communications Manager by choosing Device > Phone.
Phones registered with Cisco Unified Communications Manager display the IP address at the top of
the Phone Configuration window.
• On the phone, press the Settings button, choose Network Configuration, and then scroll to the IP
Address option.
Step 2 Open a web browser and enter the following URL, where IP_address is the IP address of the
Cisco Unified IP Phone:
http://IP_address
The web page for a Cisco Unified IP Phone 7970 Series includes these hyperlinks:
• Device Information—Displays device settings and related information for the phone. For more
information, see the “Device Information” section on page 8-3.
• Network Configuration—Displays network configuration information and information about other
phone settings. For more information, see the “Network Configuration” section on page 8-4.
• Network Statistics—Includes the following hyperlinks, which provide information about network
traffic:
–
Ethernet Information—Displays information about Ethernet traffic. For more information, see
the “Network Statistics” section on page 8-8.
–
Access—Displays information about network traffic to and from the PC port on the phone. For
more information, see the “Network Statistics” section on page 8-8.
–
Network—Displays information about network traffic to and from the network port on the
phone. For more information, see the “Network Statistics” section on page 8-8.
• Device Logs—Includes the following hyperlinks, which provide information that you can use for
troubleshooting:
–
Console Logs—Includes hyperlinks to individual log files. For more information, see the
“Device Logs” section on page 8-10.
–
Core Dumps—Includes hyperlinks to individual dump files.
–
Status Messages—Displays up to the 10 most recent status messages that the phone has
generated since it was last powered up. For more information, see the “Device Logs” section on
page 8-10.
–
Debug Display—Displays messages that might be useful to the Cisco TAC if you require
assistance with troubleshooting. For more information, see the “Device Logs” section on
page 8-10.
• Streaming Statistics—Includes the Stream 1, Stream 2, and Stream 3 hyperlinks, which display
a variety of streaming statistics. For more information, see the “Streaming Statistics” section on
page 8-10.