Chapter3 Using Video
Responding to Requests to Add Video to Conversations
3-4
User Guide for Cisco Unified Personal Communicator for Macintosh, Release 1.1
OL-10984-01
Procedure
Step1 Make sure you are ready to use video. See the “Before You Use Video” section on
page 3-2.
Step2 In the active conversation window:
Click the Actions button, then choose Add/Remove Video.
Or make sure the conversation window is active, then choose Conversation >
Add/Remove Video.
Responding to Requests to Add Video to Conversations
During a conversation, if the other person on the call adds video, buttons will
appear in the conversation window. You can choose whether to add video:
Working With Video Conversations In Progress
Information about audio conversations in progress applies also to video calls. See
the “Working With Conversations In Progress” section on page2-9.
By default, your image appears as a picture-in-picture inside the larger window
that shows the image of the other person.
To Do This Click This Button
View the video image of the other person and let the
other person view your image.
Accept Two-Way Video
View the video image of the other person but not let
the other person view your image.
Receive Video Only
Not add video to the conversation.
(You might choose this option if you are accessing
the network remotely using a slow connection.)
Continue with Audio
Only